EasyManuals Logo

Arlo Go 2 User Manual

Arlo Go 2
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
60Arlo Rechargeable Battery
Arlo Go 2 LTE/WiFi Security Camera
User Manual
Optimize your camera’s battery life
Arlo battery-powered cameras are not intended for continuous recording. The battery life of
your Arlo camera varies depending on usage.
Note: Cold temperatures can aect any battery’s capacity because of its chemistry. This
means that if you install your camera outside in cold temperatures, you might notice a shorter
battery duration, or a faster-than-expected drop in the displayed battery capacity.
Use these tips to maximize your cameras battery life:
Make sure that your camera’s rmware is up to date. For more information, see Firmware
updates on page 66.
When you’re using your Go 2 Camera with a mobile connection, Arlo recommends placing
your camera in a location with at least three bars of mobile signal strength. You can check
the mobile signal strength from the Arlo app.
If you’re using a WiFi connection, select a location for your camera with a strong WiFi
signal. You can check the strength of the WiFi signal from the Arlo app.
Your Arlo camera lets you choose the quality level of the video it records. Cameras set
to high-quality video recording use more battery power than cameras set to low-quality
video recording.
Fine-tune the position of your camera.
Angle the camera so that it only detects motion in areas of interest. This helps reduce
unwanted recordings and triggers from motion that occur in the background.
Set a schedule for your camera.
If you don’t need your camera to activate during all hours of the day, you can set it to wake
up and use battery power only during the hours when you need it. See Schedule when
your camera is armed on page 42.

Table of Contents

Other manuals for Arlo Go 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Arlo Go 2 and is the answer not in the manual?

Arlo Go 2 Specifications

General IconGeneral
TypeIP security camera
Built-in lightYes
Placement supportedOutdoor
Connectivity technologyWireless
Maximum operating distance91 m
Form factorBullet
Mounting typeCeiling/wall
Product colorWhite
Country of originChina
Ethernet LANNo
Mobile network generation4G
Field of view (FOV) angle130 °
Detection distance7 m
Alert notification typeE-mail, Push notification
LED typeIR
Infra-red wavelength850 nm
Night vision distance7.62 m
Number of illumination LEDs2
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Number of cameras1
Digital zoom12 x
Power source typeBattery
Operating temperature (T-T)-20 - 45 °C
Sensor type-
Harmonized System (HS) code8525890000
Weight and Dimensions IconWeight and Dimensions
Depth120 mm
Width64.2 mm
Height86 mm
Weight490 g
Package depth179 mm
Package width161 mm
Package height115 mm
Package weight792 g

Related product manuals