Arlo Go 2 - Page 44

44Modes, Rules, and Alerts
Arlo Go 2 LTE/WiFi Security Camera
User Manual
• Airplane mode = O
• Push notications = Enabled
iOS (Apple) devices
• Share my location = On
• Location services = Always
• Airplane mode = O
• Push notications = Enabled
• Background App Refresh = Enabled
• Cellular Data = Enabled
• Push notications = Enabled
Set up geofencing for the rst time and set up modes
1. Open the Arlo app.
2. Tap Mode.
3. Tap the camera.
A list of modes displays.
4. Tap Geofencing
.
5. Allow the Arlo app to use your mobile device’s location.
Geofencing works only if Arlo can locate your mobile device. The Location Address page
displays your current address.
6. To change the radius setting, tap Radius and select a radius size.
Radius sizes are Small, Medium, and Large (approximately 150 meters, 250 meters, and
500 meters, respectively).
7. Tap Device Location and enter a name for your location.
8. Tap Away Mode and select a mode.
Your camera uses the Away mode when your mobile device is outside the radius of your
camera’s location. Most people select Armed, Schedule, or Custom Mode so that the
camera detects motion while they’re gone.
9. Tap Home Mode and select a mode.
Your camera uses this mode when your mobile device is within the radius of your camera’s
location. Most people select Disarmed while they’re home.