■
If you want to install a preconfigured NC4000, read Chapter 4,
Installing
NC4000 Nodes.
■
If you want to learn about managing NC4000 nodes from ARRIS EMS
software,
read Chapter 5, Managing NC4000 Nodes.
Table 1.1 Installation and Activation Guide Organization
This chapter defines the intended audience and scope of this
guide. A list of tools, test equipment, and materials supporting
the procedures in Chapters 3 and 4 is also provided.
Chapter 2,
NC4000 Node Overview
This chapter provides a functional overview of the NC4000
Node, its mechanical features, mounting options,
component layout, and plug-in modules.
Chapter 3,
Configuring NC4000 Nodes
This chapter describes how to configure NC4000 Nodes to
meet specific applications. Depending on how the nodes
were ordered, much of the configuration may already be done.
The tasks described in this chapter should be performed
(or
verified) in a shop/lab environment before the nodes are
installed in the network.
Chapter 4,
Installing NC4000 Nodes
This chapter describes how to install preconfigured NC4000
Nodes in the network, including physical mounting
(pedestal or
strand mounting), cable connections, and functional
testing.
Chapter 5,
Managing NC4000 Nodes
This chapter introduces Opti-Trace EMS software and lists
NC4000 alarms and reported parameters.
Appendix A,
NC4000 Configuration
Components
This appendix lists passive plug-in components used to
configure NC4000 nodes, including pads/attenuators,
equalizers, RS4xxx return path configuration modules, and
fuses.
Appendix B,
NC4000 Node Model Numbers
This appendix describes the NC4000 model number structure
and lists the configuration options.
Use the extensive index to find specific material quickly.
To Next Page
Loading...
