Arris NC4000 - Page 77

TM 87-10923 Rev E
NC4000 Node Model Numbers
B-1
A P P E N D I X B
NC4000 NODE MODEL NUMBERS
The model number "NC4000" refers to the generic optical node, which can be configured for a
wide range of applications. Actual model numbers consist of up to 17 characters. The options for
each character in the model number are listed in Tables 1 through 10. Contact ARRIS for the full
range of available node configurations.
In the example shown in the table below, NC411A1H3H9-U0000000 describes an NC4000 node
configured as follows:
Standard housing with external test point access ports NH4000-H and a single power supply.
5-45 MHz reverse / 54 to 1002 MHz forward.
AR4x14 forward analog receiver.
OA4324HG fiber deep ultra-high output RF module.
+60 dBmV output at 1002 MHz, 18 dB linear slope.
Return Path Configured on RF Module.
DT4250N return path transceiver.
N
C
4
1
1
A1
H3
H
9
—
U0
00
00
00
Table 1
Table 2
Table 3
Table
4
T
able 5
Table 6
Table 7
Table 8
Table 9
Table 10
Table 1
Housing and Power Supply Options
1
Standard housing NH4000-H with external test point access and single PS4001 power supply
2
Standard housing NH4000-H with external test point access and dual PS4001 power supplies
Table 2
Forward/Return Split Frequency Options
1
5-45 MHz reverse / 54-870 or 1002 MHz forward
2
5-55 MHz reverse / 70-870 or 1002 MHz forward
4
5-65 MHz reverse / 85-870 or 1002 MHz forward
6
5-60 MHz reverse / 72-870 or 1002 MHz forward
9
5-85 MHz reverse / 102-870 or 1002 MHz forward