Assa Abloy Orion Installation Manual

27
ASSA ABLOY Hospitality
66 8003 016-3
4.2 HVAC
1. At Model, choose
'High voltage'.
2. Under Input configuration,
make the applicable choices
under Extra input, DSW
ext. input and DSW int.
input; see Table 3
below.
3. Under Extra input
configuration, make the
applicable choice 'Not used',
'Wired motion sensor' or
'Pipe temperature sensor';
see Table 3
for details.
Figure 28
Parameter Available choices Default setting
Extra input Normally open/normally closed Normally open
DSW ext. input
(door switch
exterior input)
Normally open/normally closed Normally open
DSW int. input
(door switch
interior input)
Normally open/normally closed Normally open
Extra input
Not used/wired motion sensor/
pipe temperature sensor
Note:
If 'Wired motion sensor' is
chosen, it is also possible to make
a further choice 'Delay wired
motion sensor'. This can be
applicable in warm countries
where there is a great difference
in temperature inside and outside
the room, to avoid that motion is
triggered when someone opens
the door, leaves the room and
locks the door. The 'Delay wired
motion sensor' parameter will also
be applicable for the internal
motion sensor.
Not used
Table 3

Assa Abloy Orion Specifications

General

Brand	Assa Abloy
Model	Orion
Category	Thermostat
Language	English