72
ASSA ABLOY Hospitality
66 8003 016-3
Appendix D: Configuration in offline scenarios
In Orion EMS offline scenarios, there is no connection to the Visionline server; each
room can be seen as a PAN (personal area network) .
The firmware in the thermostat is a coordinator firmware instead of a router firmware.
Figure D1
The RFID lock in the configuration pictures above must be prepared in two ways:
it must be online with the in-room network
EMI events must be enabled in the lock. This can be done either with
an Enable EMI events card or via Lock Service; see the applicable one
of sections Enabling EMI events via card and Enabling EMI events via
Lock Service.
Note:
The EMI events will be sent to the closest parent in the in-room network,
since there is no connection to the Visionline server.
To Next Page
Loading...
Need help?
General