Associated Research OMNIA II 8207 User Manual

89
From this screen, you can control the following test parameters: Voltage, Frequency,
A-Hi, Output N/G, Volt Range and OC-Fold. The A-Hi parameter allows you to set the
AC Source high current limit. The Output N/G parameter allows you to configure the
AC Source output to either open or close the ground connection. The Volt Range
parameter controls the output range of the AC Source (high or low). See specifications
for more details. The OC-Fold parameter allows you to set the output of the AC source
in constant current mode. When active, the A-Hi parameter can be used to set the
output current of the AC source.

Associated Research OMNIA II 8207 Specifications

General

Brand	Associated Research
Model	OMNIA II 8207
Category	Measuring Instruments
Language	English