104
Caller ID
Caller ID operation
5. Press NEXT. The handset displays EDIT NAME.
6. Use the dialing keys (page 89) to edit the name.
f Press CID or DIR to move the cursor to the left or right.
f Press 0 to add a space.
f Press MUTE/DELETE or BACKSP to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound
key).
7. Press SAVESaved to block list.
Using the telephone base:
1. Select a desired entry in the caller ID log (see Review the caller ID log on
page 98
).
2. When the desired entry appears, press SAVE.
3. Press CID or DIR to highlight Block list, and then press SELECT. The
telephone base displays EDIT NUMBER.
4. Use the dialing keys to edit the number.
f Press CID or DIR to move the cursor to the left or right.
f Press X/DELETE or BACKSP to backspace and erase a digit.
f Press and hold X/DELETE to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
5. Press NEXT. The telephone base displays EDIT NAME.
6. Use the dialing keys (page 89) to edit the name.
f Press CID or DIR to move the cursor to the left or right.
f Press 0 to add a space.
f Press X/DELETE or BACKSP to erase a character.
f Press and hold X/DELETE to erase all characters.
f Press # (pound key) to move the last word to the front. For example, Johnson
Charlie becomes Charlie Johnson when you press # (pound key).
7. Press SAVESaved to block list.
To Next Page
Loading...
Need help?
General
