143
Answering system
Answering system settings
Answer on/o
If you turn the answering system on, it answers calls and records messages
only on the home line. If your paired cell phone has voicemail, callers can leave
messages with that voicemail service.
answering system automatically turns on again.
When the answering system is turned on, the ANS ON/OFF light on the
telephone base is on. Both the handsets and telephone display ANS ON.
To turn the answering system on or o:
Using a handset:
1. Press MENU in idle mode.
2. Press CID or DIR to highlight Answering sys, then press
SELECT.
3. Press CID or DIR to highlight Answer ON/OFF, then press
SELECT.
4. Press CID or DIR to highlight On or O, then press
SELECT
Using the telephone base:
f Press ANS ON/OFF to turn the answering system on or
“Calls will be answered.” When the answering system is
“Calls will not be answered.”
-OR-
1. Press MENU in idle mode.
2. Press SELECT to select Answering sys.
3. Press CID or DIR to highlight Answer ON/OFF, then press SELECT.
4. Press CID or DIR to highlight On or O, then press SELECT to save. You
Note: If the answering system is o and there is an incoming call, the system answers aer ten rings and
announces, “Please enter your remote access code.” For more information about remote access, see pages
159-160.
ANSWERING SYS
Delet e all old
Record memo
Answer ON/OFF
BACK
SELECT
ANSWER ON/OFF
On
Off
BACK
SELECT
To Next Page
Loading...
Need help?
General
