150
Answering system
About the answering system
Answering system and voicemail
messages: those recorded on its built-in digital answering system and those
recorded in your telephone service provider’s voicemail (fees may apply).
Your telephone’s built-in digital answering system messages and voicemail
f If and XX New messages display on the telephone base and handsets,
there are new messages in the built-in answering system. To listen to
messages recorded on your digital answering system, press /PLAY/STOP
on the telephone base. To listen to messages with a handset, see To listen
to messages on a cordless handset on page 154.
f If and New voicemail display on the handset and the telephone base, your
telephone service provider is indicating that it has new voicemail for you. To
listen to your voicemail, dial an access number provided by your telephone
service provider, followed by a security code or PIN.
Some service providers bundle or combine multiple services like voicemail and
call waiting, so you may not be aware that you have voicemail. To check what
services you have and how to access them, contact your telephone
service provider.
answering system. To use the answering system rather than your voicemail
service, contact your telephone service provider to deactivate the voicemail
service.
Use the answering system and voicemail together
You can also use the telephone answering system and voicemail together by
setting your built-in answering system to answer before voicemail answers, as
described below. To learn how to program your voicemail settings, contact your
telephone service provider. Then, if you are on a call, or if the answering system
is busy recording a message and you receive another call, the second caller can
leave a voicemail message.
Set the answering system to answer calls at least two rings earlier than your
may program the delay before answering calls in seconds instead of rings. In
this case, allow six seconds per ring when determining the appropriate setting.