75
Multiple handset use
Call transfer using intercom
Use the intercom feature to transfer an outside call to another system handset
or the telephone base. You can also share an outside call with another system
handset or the telephone base.
To transfer or share an outside call using intercom:
Using a handset:
1. When on an outside call, press OPTION.
2. Press SELECT to choose Intercom. The call is automatically
put on hold.
f If you have one handset and no other registered device,
your handset displays Calling base.
f If you have other registered device(s) or more than one
handset, your handset displays INTERCOM TO: and a list
of registered devices.
Press CID or DIR to highlight a destination device,
then press SELECT.
-OR-
(0 for the telephone base, or 1-9 for handset 1-9, TONE followed by 0-2
for handset 10-12, or # for a single headset/speakerphone, # followed
by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for
all devices).
The call is automatically put on hold. Your handset displays Calling
HANDSET X or Calling BASE 0.
The destination device(s) rings and shows
HANDSET is calling
or
HANDSET X is calling (HANDSET represents the
handset name, X represents the handset number).
3. To answer the intercom call on the other device, press
HOME/FLASH,
/SPEAKER, CELL 1, CELL 2 or any dialing key (0-9 or TONE )
on the
destination handset or press
HOME
or any dialing key (0-9 or TONE )
on
the telephone base.
Both handsets show Intercom and t
he outside call is still
on hold.
Intercom
Use BT Headset
Equalizer
Caller ID log
BACK
SELECT
INTERCOM TO:
BASE 0
HANDSET 2
BACK
SELECT
To Next Page
Loading...
Need help?
General
