AT&T TL96457 User Manual

144
Answering system
Answering system settings
Voice guide to set up answering system
This feature is an alternative way for you to do the basic setup of the answering
system. You can follow the voice guide to record your own announcement, set
the number of rings, and set the message alert tone.
To use the voice guide feature:
1. Press MENU in idle mode.
2. Press CID or DIR to highlight Answering sys,
then press SELECT.
3. Press CID or DIR to highlight Voice guide, then press
SELECT. You hear a voice prompt, “This voice guide will
assist you with the basic setup of your answering system.“
4. Set up your answering system by inputting designated
numbers, as instructed in the voice guide.
Notes:
f You can press OFF/CANCEL on the handset or press CANCEL on the telephone
base to quit the voice guide at any time.
f If the system does not receive any input, it will play an alert message. If there is still no
input, it will announce “Sorry, I still have not received any input. If you want to restart
the voice guide, please enter the menu and select Voice guide under Answering system.
Good bye.”
f Aer a power outage, the system prompts you to set the date and time, and Smart call
blocker. Aer these settings are done or skipped, the system then prompts if you want
to set up the answering system via voice guide. Press YES to start the setup.
Setting up
Answering
system
ANSWERING SYS
Record memo
Answer On/Off
Voice guide
BACK SELECT
ANSWERING SYS
Record memo
Answer On/Off
Voice guid e
BACK SELECT
Setting up
Answering
system

AT&T TL96457 Specifications

General

Brand	AT&T
Model	TL96457
Category	IP Phone
Language	English