61
Telephone operation
Options while on calls
Mute
the caller cannot hear you.
Using a handset:
To mute a call:
f While on a call, press MUTE/DELETE. When mute is on, the handset screen
shows Muted for a few seconds and the MUTE icon appears until you end
mute the call.
To end mute a call:
f Press MUTE/DELETE again
Microphone
ON appears temporarily on the handset.
Using the telephone base:
To mute a call:
f While on a call, press MUTE. When mute is on, the telephone base shows
Muted for a few seconds. The MUTE light turns on and MUTE icon appears
until you end mute the call.
To end mute a call:
f Press MUTE again
Microphone ON
appears temporarily on the telephone base.
The MUTE
Mute is automatically canceled when you end the call.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call:
1. Press TONE on the handset or telephone base.
2. Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals.
3.
To Next Page
Loading...
Need help?
General
