To Next Page

To Previous Page

111

Smart call blocker

Call block settings

Set Smart call blocker on/o

The Smart call blocker feature is set to on by

default.

Using a cordless handset or the telephone

base:

1. Press CALL BLOCK when it is not in use, and

then press SELECT to select SCB On/O.

-OR-

Press MENU to enter the main menu when it is not in use.

Press CID or DIR to scroll to Smart call blk, then press

SELECT twice.

2. Press CID or DIR to highlight On or O, then press

SELECT

Control calls without numbers

Use this setting to control “out of area” or “Private” calls. You can choose to

allow or reject these calls directly. You can also choose to screen them with

or without learning the callers’ names before you decide whether to answer

or reject these calls. Moreover, you can forward these calls to the answering

system.

To change the setting:

Using a cordless handset or the telephone base:

1. Press CALL BLOCK when it is not in use.

-OR-

Press MENU to enter the main menu when it is not in use.

Press CID or DIR to scroll to Smart call blk, then press

SELECT.

Play messages

Answering sys

Smart call blk

AT&T TL96457 User Manual

Questions and Answers: