50
Telephone settings
Handset and telephone base settings
QUIET mode
When QUIET mode is turned on, the telephone silences all
sounds during the set period of time (1-12 hours). However,
the handset locator paging tone and any sound-generating
operations initiated by users, such as making calls using
the speakerphone or setting ringer volume, will sound as
QUIET mode, this feature activates
immediately and the answering system turns on automatically.
When QUIET mode is on, the answering system takes calls and
records messages without broadcasting them.
To turn QUIET mode on:
1. Press and hold QUIET
#
in idle mode to enter the QUIET
mode setting screen. The screen shows SET QUIET MODE
DURATION (1 to 12 hours)_ _.
2. Use the dialing keys to enter the desired number of hours
(1-12) you would like to turn on QUIET mode, then press
SELECTAnswering sys is ON
during quiet mode and then Quiet mode on on
idle screen.
To turn QUIET mode o:
f While QUIET mode is on, press and hold QUIET
#
. Then,
the screen shows Quiet mode is o and you hear a
Notes:
f If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID
announce features when QUIET mode is on, the sample plays but the feature is still
muted aer saving the setting.
f Aer QUIET mode is turned o or the set period of time has expired, all muted features will be activated again.
f The PTT function is not available when QUIET mode is on.
f When QUIET mode is on, and Smart call blocker is on and in screening mode, all screened calls will be sent to the
answering system aer screening. For more information on Smart call blocker, see page 107.
SET QUIET MODE
DURATION
(1 to 12 hours)
--
BACK SELECT
Answering sys
is ON during
quiet mode
Quiet mode
is off
Answering sys
is ON during
quiet mod e
SET QUIET MODE
DURATION
(1 to 12 hours)
--
BACK
SELECT
Quiet mode
is off
To Next Page
Loading...
Need help?
General
