155
Answering system
Message playback
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause or delete the message.
When messages are playing on the telephone base:
f Press /VOLUME/ to adjust the message playback volume.
f Press /SKIP or
SKIP
to skip to the next message.
f Press /REPEAT or
REPEAT
to repeat the message currently playing.
Press /REPEAT or
REPEAT
twice to listen to the previous message.
f Press X/DELETE to delete the current message. The system advances to the
next message.
f Press 2 to pause the playback and show the caller ID information.
f Press HOME or
CALL
to use the home line, or press CELL 1 or
CELL 2 to use the cell line to call back the caller. If necessary, press #
(pound key) or 1
f Press CANCEL or
BACK
to restart the playback. If you do not call back
within 10 seconds, message playback restarts.
f Press HOME or CELL 1 or CELL 2 to pause the message playback. The
telephone base screen displays Call back? with the caller ID information.
Press
CALL
to call back the caller, or
BACK
to restart the message playback.
If the dialing format used is not correct, then use the option, as mentioned
above, to choose the correct dialing format before calling back the caller.
f Press /PLAY/STOP or CANCEL to stop the playback.
To Next Page
Loading...
Need help?
General
