35
Bluetooth
Remote voice control
Activate remote voice control
1. Press VOICE on the handset or
telephone base.
f If you have connected two cell
phones to the telephone, the
telephone shows Activate
remote voice control of
1: Cell Phone X 2: Cell Phone Y
(Cell Phone X and Cell Phone Y
represent the device names of
your cell phones). Press CELL 1 or
CELL 2.
2. The telephone then shows Activating remote
voice control....
f If the activation fails, the telephone displays
Connection timeout. Please check cell status..
Press OK and try again.
3. When the telephone base or handset plays the
app, start speaking toward the telephone base or handset,
and then wait for feedback. Make reply to the voice app’s
feedback, if necessary.
f You can press /SPEAKER
the speakerphone and listen to the feedback through
the handset earpiece.
4. To end the current remote voice control session, press
END on the telephone base or handset. The screen shows
Remote voice control ended.
following Steps 1-3 mentioned above.
1
2
Activate remote
voice control of
1: Cell Phone X
2: Cell Phone Y
CELL 1 CELL 2
1
2
Activating
remote voice
c o n t r ol...
END
1
2
Cell Phone X
00:0 0:01
END
Telephone base
VOICE
Handset
To Next Page
Loading...
Need help?
General
