54
Telephone operation
Telephone operation
Make, answer or end a cell call
The TL96457/TL96547 can be used to make or answer calls on the cell line.
You can connect a maximum of two Bluetooth enabled cell phones to the
telephone base. Both cell phones can be used on cell calls at the same time.
Using a handset:
To make a cell call:
f Press CELL 1 or CELL 2. Enter the telephone number, then press DIAL.
To predial a cell call:
f Enter the telephone number, then press CELL 1 or CELL 2.
To answer a cell call:
f Press HOME/FLASH, /SPEAKER, CELL 1, CELL 2 or any dialing key
(0-9 or TONE ).
To end a cell call:
f Press OFF/CANCEL, or put the handset in the telephone base or charger.
Using the telephone base:
To make a cell call:
f Press CELL 1 or CELL 2. Enter the telephone number, then press DIAL.
To predial a cell call:
f Enter the telephone number, then press CELL 1 or CELL 2.
To answer a cell call:
f Press HOME, CELL 1, CELL 2 or any dialing key (0-9 or TONE ).
To end a cell call:
f Press CELL 1 or CELL 2.
Notes:
f You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the
telephone base.
f If you do not want to answer the call, press REJECT.
f When you try to make a cell call but your cell phone is not connected to the base, the telephone base displays
Cellular phone not connected. Please connect to proceed.. Refer to Bluetooth connection
from idle mode on page 26 and Connect/disconnect an active device on page 27.
f Make a cell call using the cell lines of your telephone system instead of the remote voice control feature, if you need
to press dialing keys (0-9, TONE
, QUIET
#
) during a call.
To Next Page
Loading...
Need help?
General
