84
Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT conversation to an intercom call.
1. When your device displays Press and hold [PTT] to talk, press INTCOM. The
screen displays Switch to Intercom?.
2. Press SELECTCalling BASE 0 or Calling
HANDSET XPush to talk Ended and
then HANDSET X is calling or BASE 0 is calling. The destination device rings.
3. Press HOME/FLASH or any dialing key (0-9 or TONE ) on the destination
handset, or press HOME or any dialing keys (0-9 or TONE ) on the
telephone base to answer the intercom call. Both devices now show
Intercom.
4. To end the intercom call, press OFF/CANCEL or
END
on your handset or
place the handset in the telephone base or charger, or press
END
on the
telephone base. Both screens show Intercom ended.
Answer an incoming call during PTT
When you receive an incoming outside call during PTT, there is an alert tone.
The caller ID is displayed with PTT screen, alternately.
During a one-to-one PTT call:
f To answer an incoming home call, press HOME/FLASH on the initiating or
destination handset, or press HOME on the telephone base.
f To answer an incoming cell call, press CELL 1 or CELL 2 on the initiating
or destination handset or the telephone base.
The PTT call ends automatically and the outside call is answered.
During a one-to-group PTT call:
f To answer an incoming home call, press HOME/FLASH on the initiating
handset, or press HOME on the telephone base.
f To answer an incoming cell call, press CELL 1 or CELL 2 on the initiating
handset or the telephone base.
The PTT call ends automatically and the outside call is answered.
To Next Page
Loading...
Need help?
General
