110
Smart call blocker
About Smart call blocker
Call category Call control
Calls without numbers
f You can set to screen, allow,
or block all calls of this call
category, or to send these calls
to the answering system. Allow
is the default setting. To change
the setting, see Control calls
without numbers on page 111.
Screening with caller name
If you have selected this option,
the telephone plays the screening
announcement, and then asks the
caller to say his/her name before the
call rings on your telephone. You will
hear the caller’s name announced.
Then, you can decide whether
to accept or reject the call, or to
forward the call to the answering
system.
Screening without caller name
If you have selected this option,
the telephone plays the screening
announcement, and then asks
the caller to press the pound key
(#) before the call rings on your
telephone. You can then answer the
call.
Allow (default settings)
The telephone allows the calls to get
through and ring. The caller’s number
will not be saved to the allow list.
Answering system
If you have selected this option, the
telephone forwards the calls to the
answering system without ringing.
Block
If you have selected this option, the
telephone rejects the calls with block
announcement without ringing. The
caller’s number will not be saved to
the block list.
Uncategorized calls
f You can set to screen, allow,
or block all calls of this call
category, or to send these
calls to the answering system.
Allow is the default setting. To
change the setting, see Control
uncategorized calls on page
112.
To Next Page
Loading...
Need help?
General
