116
Smart call blocker
Call block settings
f Press BACKSP, or press MUTE/DELETE on the handset or X/DELETE on
the telephone base to erase a character.
f Press and hold MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase all characters.
f Press TONE to change the next letter to upper or lower case.
f Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound
key).
7. Press SAVE when done and the screen shows Saved to block list.
Edit a block entry:
Using a cordless handset or the telephone base:
1. Search for the desired entry in the block list (see Review block list on page
115).
2. When the desired entry displays, press EDIT. The screen displays EDIT
NUMBER along with the phone number to be edited. If you only want to edit
the name, skip to Step 4.
3. To edit the number:
f Use the dialing keys to enter digits.
f Press CID or DIR
f Press BACKSP, or press MUTE/DELETE on the handset or X/DELETE on
the telephone base to erase a digit.
f Press and hold MUTE/DELETE on the handset or X/DELETE on the
telephone base to erase all digits.
f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a p
appears).
4. Press NEXT to move on to the name. The screen displays EDIT NAME along
with the name to be edited.
5. To edit the name:
f Use the dialing keys to enter characters.
f Press CID or DIR
f Press 0 to add a space.
To Next Page
Loading...
Need help?
General
