119
Smart call blocker
Call block settings
f Press and hold MUTE/DELETE on the handset or X/DELETE on the telephone
base to erase all characters.
f Press TONE to change the next letter to upper or lower case.
7. Press SAVE to store your block entry.
Notes:
f Numbers saved in your directory can also be saved to the allow list.
f If you save an allow list entry that has already been saved to the block list, the entry in the block list will be removed.
Review allow list:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when it is not in use.
-OR-
Press MENU to enter the main menu when it is not in use.
Press CID or DIR to scroll to Smart call blk, then press
SELECT.
2. Press CID or DIR to scroll to Allow list, and then press
SELECT.
3. Press SELECT to choose Review.
4. Press CID or DIR to browse through the allow entries.
Note: Allow list is empty appears if there are no allow entries.
Save a caller ID log entry to allow list:
Using a cordless handset or the telephone base:
1. Search for the desired caller ID log entry (see Review the caller ID log on
page 98).
2. When the desired entry displays, press SAVE.
3. Press CID or DIR to scroll to Allow list, then press SELECT.
4. The handset displays EDIT NUMBER. Use the dialing keys to edit the number,
when necessary.
f Press CID or DIR
f Press BACKSP, or press MUTE/DELETE on the handset or X/DELETE on
the telephone base to backspace and erase a digit.
SMART CALL BLK
SCB On/Off
Bloc k list
Allow list
BACK
SELECT
ALLOW LIST
Review
Add new entry
Delete all
BACK
SELECT
To Next Page
Loading...
Need help?
General
