AT&T TL96457 User Manual

24
Bluetooth
Bluetooth setup
6. Press NEXT to turn on the telephone base discoverable
mode. The screen displays Set cell to search base: AT&T
DECT 6.0 PIN: 0000.
7. Promptly turn on the Bluetooth feature of your cell
phone and search for or add new devices. Once your cell
AT&T DECT 6.0), press
the appropriate key on your cell phone to continue the
pairing process.
f Your cell phone may require a passcode. In this case,
the telephone base displays Check cellular. ENTER
PASSCODE. Enter the cell phone passcode (typically
0000) into the telephone base and press SET.
f Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process, if required. The telephone base displays
Adding Cell Phone Y (Cell Phone Y represents the
device name of your cell phone).
When a device is successfully connected, the telephone base
displays Cell Phone Y is added and connected to base. and
Cell Phone Y represents the
device name of your cell phone). The corresponding status
icon ( 1 or 2) displays on the handset and telephone
base. The corresponding device light on the telephone base
(CELL 1 or CELL 2/HEADSET ) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your TL96457/TL96547. Check the Bluetooth compatibility list at
telephones.att.com/bluetooth.
Notes:
f The pairing process may take up to one minute. If the pairing process fails, try again.
f The steps for the pairing process may vary for dierent cell phones. If this happens, follow the prompts on your cell
phone and your TL96457/TL96547 to complete the pairing process.
f Refer to the user’s manual of your cell phone on how to search for or add a new Bluetooth device.
Adding
Cell Phone Y
Cell Phone Y
is added
and connected
to base.
Set cell to
search base:
AT&T DECT 6.0
PIN:0000

AT&T TL96457 Specifications

General

Brand	AT&T
Model	TL96457
Category	IP Phone
Language	English