Atlas Copco FOCUS 60

Focus 60 / Focus 61 User Guide Installation Instructions
9839 0211 01 Edition 1.1 19 (106)
2. Connect the power cable from the multifunctional power socket
(refer to the figure on the right).
3. Connect the power cable to the AC Power.
NOTE: By using the On-Off switch (placed on the bottom side of the Focus 60 / Focus 61),
switch the Focus 60 / Focus 61 on, to verify that the installation is correct. Check that the light
of the On-Off switch is red and that the other LEDs (placed on the front panel) illuminate
correctly.
Fuses Holder
Multifunctional
power socket
On-Off
switch