Atlas Copco FOCUS 60

User Interface Focus 60 / Focus 61 User Guide
20 (106) 9839 0211 01 Edition 1.1
4 USER INTERFACES
4.1 Focus 60 / Focus 61 Display
During the start-up of the Focus 60 / Focus 61, the following screens show in sequence:
NOTE: The above screens refer to the Focus 61 start-up. The start-up of the Focus 60 is the
same, unless the screen in the middle (“Focus 60” replaces “Focus 61”).
If no one MWR-TA is associated with any Station of the Focus 61, the following screen is shown:
If a MWR-TA is associated with one Station of the Focus 60 / Focus 61, but either the batteries level of
the MWR-TA is too low or the MWR-TA is out of the range of the Focus 60 / Focus 61, the following
screen is shown:
Focus 61
A67800031
INIT
Focus 60%
Protocol 0%
The Yellow LED points out
an ERROR (Refer to the
paragraph “LED” for further
details about LEDs)
The Yellow LED points out an
ERROR (Refer to the paragraph “LED”
for further details about LEDs)