Atlas Copco FOCUS 60

User Interface Focus 60 / Focus 61 User Guide
22 (106) 9839 0211 01 Edition 1.1
4.3 Focus 60 / Focus 61 LEDs
There are three LEDs on the Focus 60 / Focus 61front panel:
Icon
Name
Description
OK
Middle button under the display.
It changes the settings of the device.
DOWN
Left button under the display.
It slides down the fields of the settings and
decreases value in settings menu.
UP
Right button under the display.
It slides up the fields of the settings and increases
value in settings menu.
LED color
Description
Blue
The Blue LED is on when the system is ready.
The system is not ready, if:
- there is an error (Main error flag in MainState
but field is set);
- the system is processing an update (any of the
flags in the update field of the MainState but
field is set);
- the “Ready” flag in the script station state for
any enabled station is not set.
Red/ Blinking
Green
Red: The Focus 60 / Focus 61communicates with
ToolsTalk BLM.
Blinking Green: The Focus 60 / Focus 61
communicates with a MWR-TA.
Yellow
The Focus 60 / Focus 61 display shows an error.
LEDs