Atlas Copco FOCUS 60

Focus 60 / Focus 61 User Guide Programming Focus 60 / Focus 61
9839 0211 01 Edition 1.1 65 (106)
The Steps List area shows all
of the Steps defined (see the
picture on the right).
NOTE: It is not possible to modify a step already saved. To remove a step, select it and click
Remove icon ( ).
NOTE: It is MANDATORY to disconnect the ToolsTalk BLM to use Focus 60/ Focus 61 and
start a Job.
6.5 Identifier
Identifier option can both start / abort a Jobs / Job steps and record tightenings results.
Double-click Identifier icon placed in the Device Files area in order to open the configuration window:
Device Files area