Installation Instructions Focus 60 / Focus 61 User Guide
18 (106) 9839 0211 01 Edition 1.1
3 INSTALLATION INSTRUCTIONS
3.1 Installing Focus 60 / Focus 61
WARNING: Install the Focus 60 / Focus 61 close to the AC Power in order to manage it easy.
NOTE: Position the Focus 60 / Focus 61 so that the On-Off switch is easily accessible.
NOTE: For maximum tool performance, mount Focus 60 / Focus 61 in order to guarantee free
airflow. This improves the cooling of the controller.
1. Mount the Focus 60 / Focus 61 either on the wall or on
steel plate by using four M5 screws. If mounting on a wall,
make sure to use the correct wall bracket (plug and screw).
If mounting on a steel plate, make sure that the plate is at
least 2 mm thick.
NOTE: Refer to the paragraph “Specifications –
Dimensions” to define how to install the M5 screws.
NOTE: Use ONLY the power cable provided with the Focus 60 / Focus 61 package. Using of
any other power cable may impair the protection provided by the equipment.
To Next Page
Loading...
