Atlas Copco FOCUS 60 - Working With Open Protocol

Focus 60 / Focus 61 User Guide Working with Open Protocol
9839 0211 01 Edition 1.1 93 (106)
11 WORKING WITH Open Protocol
NOTE: Compatible Atlas Open Protocol (AOP): 1.6.3
Atlas Open Protocol (AOP) is a communication protocol that interfaces directly with the Focus 61.
To enable this application, double-click the Open Protocol icon placed in the Device Files area (refer to
the picture above: Connections section); the following pop-up shows:
2. Enable Open Protocol
2. Click Advanced
Settings option
1. Enable Open Protocol