Working with Open Protocol Focus 60 / Focus 61 User Guide
94 (106) 9839 0211 01 Edition 1.1
After enabling the Open Protocol (by clicking Enabled box placed in Open Protocol section – refer to the
screen above), it is possible to access the Advanced Settings (by clicking Advanced Settings button):
After setting the Extended Protocol Settings, click OK; finally click Save in the below pop-up:
If no reply will be received,
the telegram acknowledge is
transmitted again a number of
times equal to the Maximum
resent repetition
Timeframe within a
telegram acknowledge
needs to be received
The application needs to send a
telegram at least every 10 s in order
to keep the connection established. If
no telegram is being received in
time, the connection is closed by the
controller
To Next Page
Loading...
