Atlas Copco FOCUS 60

Focus 60 / Focus 61 User Guide Working with ToolsNet
9839 0211 01 Edition 1.1 99 (106)
12 WORKING WITH ToolsNet
ToolsNet is an application that configures the Focus 60 / Focus 61, in order to allow to send data to the
same ToolsNet.
To enable this application, double-click the ToolsNet icon placed in the Device Files area (refer to the
screen above: Connections section); the following pop-up shows:
After setting the ToolsNet Configuration, click Save.
Ethernet Interface has 3
options:
- None: It disables the
comunication
- ETH_A/B: Interface to use
to communicate with
ToosNet