Atlas Copco FOCUS 60

Focus 60 / Focus 61 User Guide Introduction
9839 0211 01 Edition 1.1 7 (106)
1 INTRODUCTION
1.1 About this Document
This document is a User Guide for the Focus 60 / Focus 61: it consists of the following main parts:
Part
Name
Description
Chapter 1
Introduction
This chapter introduces this User Guide and provides
the technical specifications for the Focus 60 / Focus
61.
Chapter 2
System Overview
This chapter introduces the Focus 60 / Focus 61 with
its main functions.
Chapter 3
Installation Instructions
This chapter explains how to install the Focus 60 /
Focus 61.
Chapter 4
User Interfaces
This chapter provides an overview of the user
interfaces available on the Focus 60 / Focus 61.
Chapter 5
Working with ToolsTalk
BLM
This chapter introduces the operations into the Focus
60 / Focus 61 management software.
Chapter 6
Programming Focus 60 /
Focus 61
This chapter drives the operator in programming the
Focus 60 / Focus 61 in order to work on the production
line. This includes creating the Pset for the MWR-TA
and programming the Jobs.
Chapter 7
Executing Tightening
Operations
This chapter explains how to execute tightening
operations with MWR-TA connected with the Focus
60 / Focus 61.
Chapter 8
Live Monitor
This chapter explains how to view live results with
ToolsTalk BLM.
Chapter 9
Results Viewer
This chapter explains how to review the results of the
tightening operations with ToolsTalk BLM.
Chapter 10
Focus 60 / Focus 61 Settings
This chapter explains how to setup the Focus 60 /
Focus 61.
Chapter 11
Working with Open Protocol
This chapter describes how to work with Atlas Open
Protocol application.
Chapter 12
Working with ToolsNet
This chapter describes how to work with ToolsNet.