Atlas Copco FOCUS 60

Programming Focus 60 / Focus 61 Focus 60 / Focus 61 User Guide
66 (106) 9839 0211 01 Edition 1.1
The following parameters configure the Identifier:
START JOBS
Initialize
station
Select the Job to use when the Focus 60 / Focus 61 is initialized.
Message
Message area selects the signal that start a Job / Job step.
Select the signal between the following options:
 Barcode
 AOP_setvin
 AOP_Identifier
Define the following parameters:
 Length: number of the characters of the input signal (barcode or AOP)
 Significant Position: it defines the position of the characters that arranges the
substring that starts the Job/Job step
 Significant String: click Set Strings button; the following window opens both for
Job and Job steps:
Steps list
Job Steps list: from the
menu select the step to use
Job list: from the menu
select the Job to use