Atlas Copco FOCUS 60 - Page 3

Focus 60 / Focus 61 User Guide Revision history
9839 0211 01 Edition 1.1 3 (106)
Revision history
Edition
Date
Author
Description
Reference
Minimum
Software version
(ToolsTalk BLM)
Reference
Firmware
version
1.0
11 October
2016
C. Pacente
First issue
10.0.0
5.5.0.x
1.1
13 January
2017
C. Pacente
Specifications updated (par. 1.3), System
Overview updated (chapter 2), Focus 60 / Focus
61 Ethernet Ports updated (par. 4.4), Focus 60 /
Focus 61 Barcode Scanner Interface (RS232)
updated (par. 4.5), Focus 60 / Focus 61 I/O BUS
(CAN) updated (par. 4.6), Focus 60 / Focus 61
Wave Flexible Antenna updated (par. 4.7),
Software Installation updated (par. 5.1), Pset
Configuration updated (par. 6.3), I/O Accessories
updated (par. 6.6), Results Viewer updated
(chapter 9), CBP added (chapter 13)
10.1.0
5.5.1.x
Copyright Atlas Copco Industrial Technique AB
NOTE: This User Guide may be altered without further notice.
For further information log on to the Atlas Copco website: www.atlascopco.com
NOTE: The programming software (ToolsTalk BLM) may be updated with no changes
regarding the Focus 60 / Focus 61 functionalities.
The Reference Firmware version requires a specific Software version (for further details refer to
the above “Revision history” table).
NOTE: In case of conflicts between translations of this User Guide, always refer to the official
English version.