Atlas Copco FOCUS 60 - Page 36

Working with ToolsTalk BLM Focus 60 / Focus 61 User Guide
36 (106) 9839 0211 01 Edition 1.1
If necessary, select “Focus 60” or “Focus 61” in the Target Device area as shown in the screen below:
Turn the Focus 61 on and wait until the initialization is completed.
Then verify that the PC and Focus 61 are connected with the same
network.
NOTE: The connection between the ToolsTalk BLM and
the Focus 60 / Focus 61 is done via Ethernet.
Use the red button (placed
on the bottom of the
controller), to turn the
Focus 61 on
Select “Focus 61” in the
Target Device area