Focus 60 / Focus 61 User Guide Working with ToolsTalk BLM
9839 0211 01 Edition 1.1 45 (106)
The “Focus Update process” starts
automatically (see the figure on the right).
At the end of the “Focus Update process”
a “Settings saved” pop-up shows (see the
figure on the right).
Do the instructions provided into the
“Settings saved” pop-up and click OK.
NOTE: Before rebooting, it is highly recommended to select / confirm the correct Ethernet
configuration, by acting on the Network Adapters section placed in the Device Files area.
To Next Page
Loading...
