Focus 60 / Focus 61 User Guide Programming Focus 60 / Focus 61
9839 0211 01 Edition 1.1 49 (106)
The Jobs start either automatically when the Focus 60 / Focus 61 turns on or starting the operation by
external signal given by scanning a barcode string or by the AOP command (refer to paragraph “Events
Configuration”).
Connect ONLY one barcode scanner with the Focus 60 / Focus 61.
It is not possible to connect more stacklights (or other compatible components) with the Focus 60 / Focus
61, if the connected I/O Device forwards the I/O Bus physically.
Connect ToolsTalk BLM with the Focus 60 / Focus 61 (refer to paragraph “Connecting with the Focus 60
/ Focus 61”).
On the left of the main screen (in the Device
Files area), there are the Station(s) with the
associated Jobs:
The following paragraphs describe step-by-step how to configure Stations, Psets, Jobs and Events, and
how to associate the MRW Wrenches with Station(s).
To Next Page
Loading...
