Atlas Copco FOCUS 60

Focus 60 / Focus 61 User Guide Programming Focus 60 / Focus 61
9839 0211 01 Edition 1.1 51 (106)
The Device Files area defines the stations associated with the Focus 60 / Focus 61 connected. For each
station there are MWR-TA associated, which execute the Jobs programmed.
For renaming the Station associated with the Focus 60 / Focus 61 connected, right-click in
correspondence of the symbol placed close to each station name and shown on the right:
The following screen is shown:
After clicking “Rename Station …” the following screen shows:
Type the “New Station Name” in
correspondence of the respective text
box; then click Save.
Once it is done, the Station name in the
Device Files area is renamed according
to the new input (for instance, in this
case, “Station_A”):
1. Type the “New Station Name”
2. Click Save