Atlas Copco FOCUS 60 - Page 85

Focus 60 / Focus 61 User Guide Results Viewer
9839 0211 01 Edition 1.1 85 (106)
 Wrench Status filter: click the drop-down list
and select between the results status list (see
the list on the right):
After setting Wrench Status filter, click Add.
 Wrench Serial filter: set the Wrench Serial filter with one of the following procedures.
o Click the drop-down list in correspondence of “equal to” in order to show the Serial numbers
of the wrenches connected with one of the two Stations. Select one Wrench Serial.
o Keep ANY on the drop-down list placed in correspondence of “equal to”. Manually insert the
Serial number of the necessary wrench in correspondence of “starts with”. This function
examines Serial numbers also if they are partially inserted into the related text box, provided
that the partial Serial number starts from the first digit.
NOTE: Use either the first or the second procedure above given.
After setting Wrench Serial filter, click Add.