Atlas Copco HiLight B6+ Kd ESF User Manual

- 83 -
Notes
1) Reference conditions for engine performance to ISO 3046-1.
2) See derating diagram in the graph section or consult the factory for other conditions.
3) At reference conditions unless otherwise stated.
4) Rating definition (ISO 8528-1):
LTP: Limited Time Power is the maximum electrical power which a generating set is capable of delivering (at variable load), in the event of a
utility power failure (for up to 500 hours per year of which a maximum of 300 hours is continuous running). No overload is permitted on these
ratings. The alternator is peak continuous rated (as defined in ISO 8528-3) at 25°C.
PRP: Prime Power is the maximum power available during a variable power sequence, which may be run for an unlimited number of hours per
year, between stated maintenance intervals and under the stated ambient conditions. A 10% overload is permitted for 1 hour in 12 hours. The
permissible average power output during a 24h period shall not exceed the stated load factor as indicated on the AML.
5) Specific mass fuel used: 0.86 kg/l.
6) Thermal release is higher at 25°C.
7) Optional equipment
00_00_HiLight B6+_EN.book Page 83 Thursday, September 2, 2021 11:50 AM

Atlas Copco HiLight B6+ Kd ESF Specifications

General

Brand	Atlas Copco
Model	HiLight B6+ Kd ESF
Category	Lighting Equipment
Language	English