Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.21 - Removing and installing dust and pollen filter
- -> Fold up movable section -A- of the plenum chamber cover.
- Push back lugs -B-.
- Remove the dust and pollen filter element from its housing.
Notes:
◆ To prevent water from entering the dust and pollen filter or the heater, ensure that the plenum chamber
cover and cowl panel trim are fitted correctly.
◆ The movable section -A- of the plenum chamber cover must not rest on the dust and pollen filter.
◆ The dust and pollen filter element should be renewed at regular intervals.
=> Maintenance manual
◆ -> The dust and pollen filter must be installed correctly in mounting frame -B-; the arrows -A- printed on the
filter indicate the direction of airflow through the filter.
Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
1.21 - Removing and installing dust and pollen filter 113
To Next Page
Loading...
