Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
13.4 - Dismantling and assembling air conditioner
1 Seal
◆ Check - replace if damaged (seals off the intake duct from the passenger compartment).
2 Air flow flap
◆ Apply small amount of grease to bearing points (with G 052 745 A3).
3 Grommet
4 Lever
5 Top half of housing
◆ Assembling housing =>Fig. 1 .
◆ Attaching seal to refrigerant lines =>Fig. 2 .
Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
13.4 - Dismantling and assembling air conditioner 231
To Next Page
Loading...
