Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Installation notes:
◆ Always perform self-diagnosis of air conditioner following installation (=> Page 4 ).
◆ When installing the positioning motor, ensure that actuating arm - Check -C- is correctly seated.
◆ Fit the wiring harness so that it cannot come into contact with moving parts (e.g. the positioning motor lever).
6.10 - Removing and installing temperature flap positioning motor - Remove and install -V68
- Remove footwell vent => Page 181 .
- -> Detach connector -A-.
- Remove bolts -B- (3x)
- Disengage actuating arm and remove positioning motor.
Installation notes:
◆ Always perform self-diagnosis of air conditioner following installation (=> Page 4 ).
◆ When installing the positioning motor, ensure that actuating arm-Check -C- is correctly seated.
◆ Fit the wiring harness so that it cannot come into contact with moving parts (e.g. the positioning motor lever).
6.11 - Removing and installing central flap positioning motor -V70
- Remove footwell vent => Page 181 .
- -> Detach connector -A-.
- Remove bolts -B- (3x).
- Disengage actuating arm and remove positioning motor.
Installation notes:
◆ Always perform self-diagnosis of air conditioner following installation (=> Page 4 ).
◆ When installing the positioning motor, ensure that actuating arm - Check -C- is correctly seated.
◆ Fit the wiring harness so that it cannot come into contact with moving parts (e.g. the positioning motor lever).
Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
182 87 - Air conditioning
To Next Page
Loading...
