Audi A3 1997 - Making an Auxiliary Tool for Dismantling the Dash Panel Vents; Removing and Installing Left and Right Dash Panel Vent

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- -> Insert auxiliary tools -A- in dash panel vent and withdraw dash panel vent evenly from dash panel.
Note:
Attach hook -B- of the auxiliary tool to the housing rear to prevent damage to the vent.
1.4 - Making an auxiliary tool for dismantling the dash panel vents
- -> Bend wire (diameter 3 mm) as shown in illustration.
- Dimension x = 6 mm
1.5 - Removing and installing "left" and "right" dash panel vent
- -> Insert auxiliary tools -A- in dash panel vent and withdraw dash panel vent from dash panel.
Note:
Attach hook -B- of the auxiliary tool to the housing rear to prevent damage to the vent.
Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
92 80 - Heating