Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
11 Mounting
◆ Apply small amount of grease to bearing points (with G 052 745 A3).
12 Lever
◆ For central flap
13 Bolt
14 Lever
◆ For temperature flap
15 Central flap
◆ Install on correct side (shorter section of flap on top).
16 Footwell/defroster flap
◆ Apply small amount of grease to bearing points (with G 052 745 A3).
17 Temperature flap
18 Seal
◆ Attaching seal to refrigerant lines =>Fig. 2 .
Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
13.4 - Dismantling and assembling air conditioner 233
To Next Page
Loading...
