Audi A3 1997 - Page 36

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Rapid data transfer HELP
Select function XX
- Press keys -0- and -7- (07 selects the "Encoding control unit" function.)
-> Indicated on display:
Rapid data transfer Q
07 - Encoding control unit
- Press Q to confirm entry.
-> The following appears on the display:
Encoding control unit
Enter code number XXXXX
Note:
Next position can be selected by pressing the ⇒ key.
Different codes:
◆ Codes for operating and display unit -E87 with the following indices:
- Indices "H", "J, "K" or "L"
- and from index "O" onwards
Code Meaning
0 No assignment
Type of engine cooling
0 Vehicle without map-controlled cooling
1 Vehicle with map-controlled cooling
Country (export version)
0 Rest of the world (ROW) except for USA and Japan
1 USA
2 Japan
Engine version
4 4-cylinder
Vehicle/engine type
0 LHD/petrol engine
1 RHD/petrol engine
3 LHD/diesel engine
4 RHD/diesel engine
Examples of code
00040 4-cylinder Left-hand drive petrol engine without
map-controlled cooling for rest of the world
01040 4-cylinder Left-hand drive petrol engine with
map-controlled cooling for rest of the world
- Encode operating and display unit -E87 according to the vehicle type, engine and country.
- Press Q to confirm entry.
- Perform basic setting =>Page 24 .
Notes:
◆ If a wrong coding was entered into the operating and display unit -E87 it will be suppressed. The fault "coding
XXXXX not accepted" is displayed and the old coding remains intact.
◆ If an operating and display unit -E87 is newly installed (out of spare part programme) it is coded with "00001".
Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
30 01 - Self-diagnosis, Electrical check