49
Displayed messages (ATW-R1440)
Message Description
No receiver unit No receiver unit is connected to the receiver.
Initializing The receiver unit is connecting to the receiver.
Exceeding Rx link limit
The number of sequential receivers that can be linked has
been exceeded. Up to five receivers can be linked.
Rebooting The receiver is restarting.
RU14 firmware is not matched Update it now?
The firmware of the connected receiver unit does not match
that of the receiver. Select “Yes” to start the update.
A firmware update is available for Tx in A1. Pls
update with Wireless Manager App via USB.
[1][2]
There is old firmware on the transmitter being
communicated with.
Use the dedicated software (Wireless Manager) to update.
Firmware updating… The firmware of the receiver is being updated.
[1] When the transmitter ID is A1.
[2] Use button operations to return to the main screen.
To Next Page
Loading...
