Setting ATW-R1440
56
Resetting
Reset receiver settings to factory defaults.
1
From the receiver settings menu, select “UTILITIES” and press the control dial.
2
Turn the control dial to select “RESET” and press the control dial.
3
Turn the control dial to select “Yes” and press the control dial.
4
Turn the control dial to select “Yes” and press the control dial.
The settings are reset.
Checking the version
Display the version of the receiver firmware.
1
From the receiver settings menu, select “UTILITIES” and press the control dial.
2
Turn the control dial to select “VERSION” and press the control dial.
The firmware version appears.
Manual
Display a 2D code for the manual.
1
From the receiver settings menu, select “UTILITIES” and press the control dial.
2
Turn the control dial to select “WEB MANUAL” and press the control dial.
The 2D code appears.
To Next Page
Loading...
