How to install the receiver
16
Rack-mounting
Use the included rack-mount adapters and fixing screws to mount the receiver on a commercially available rack.
Screws for rack-mounting the receiver are not included.
The required rack specifications are as follows:
- EIA-standard 19-inch rack
- 1U-size attachable rack
- Rack with a shelf on which the receiver is placed or a guide rail that supports the receiver
Consider ventilation when rack-mounting to avoid heat building up in the rack.
When installing the product on a rack, make sure that the temperature inside the rack does not reach or
exceed 45°C (113°F). Higher temperatures may negatively affect the internal parts of the product, causing
the product to malfunction.
Do not place any objects around the rear of this product to ensure proper ventilation.
Rack-mounting vertically stacked receivers
Make sure that the antennas of vertically stacked receivers do not touch. If they are touching, adjust their angles.
To Next Page
Loading...
