Audio Technica System 20 PRO - Saving Presets; Loading Presets

Setting ATW-R1440
55
1
From the receiver settings menu, select “UTILITIES” and press the control dial.
2
Turn the control dial to select “CTRL DIAL” and press the control dial.
3
Turn the control dial to select “Default”/“Invert” and press the control dial.
The setting is complete.
Saving presets
You can save the receiver settings.
1
From the receiver settings menu, select “UTILITIES” and press the control dial.
2
Turn the control dial to select “PRESET” and press the control dial.
3
Turn the control dial to select “Save as preset” and press the control dial.
4
Turn the control dial to select “Yes” and press the control dial.
The settings are saved.
Loading presets
Load settings that have been saved with the procedure under “Saving presets”.
1
From the receiver settings menu, select “UTILITIES” and press the control dial.
2
Turn the control dial to select “PRESET” and press the control dial.
3
Turn the control dial to select “Recall preset”.
4
Turn the control dial to select “Yes” and press the control dial.
5
Turn the control dial to select “Yes” and press the control dial.
The settings are loaded.